Understanding Dimethyl Methylphosphonate Adsorption and Decomposition on Mesoporous CeO2.

The increased risk of chemical warfare agent usage around the world has intensified the search for high-surface-area materials that can strongly adsorb and actively decompose chemical warfare agents. Dimethyl methylphosphonate (DMMP) is a widely used simulant molecule in laboratory studies for the investigation of the adsorption and decomposition behavior of sarin (GB) gas. In this paper, we explore how DMMP interacts with the as-synthesized mesoporous CeO2. Our mass spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy measurements indicate that DMMP can dissociate on mesoporous CeO2 at room temperature. Two DMMP dissociation pathways are observed. Based on our characterization of the as-synthesized material, we built the pristine and hydroxylated (110) and (111) CeO2 surfaces and simulated the DMMP interaction on these surfaces with density functional theory modeling. Our calculations reveal an extremely low activation energy barrier for DMMP dissociation on the (111) pristine CeO2 surface, which very likely leads to the high activity of mesoporous CeO2 for DMMP decomposition at room temperature. The two reaction pathways are possibly due to the DMMP dissociation on the pristine and hydroxylated CeO2 surfaces. The significantly higher activation energy barrier for DMMP to decompose on the hydroxylated CeO2 surface implies that such a reaction on the hydroxylated CeO2 surface may occur at higher temperatures or proceed after the pristine CeO2 surfaces are saturated.

Battling Chemical Weapons with Zirconium Hydroxide Nanoparticle Sorbent: Impact of Environmental Contaminants on Sarin Sequestration and Decomposition.

The promising reactive sorbent zirconium hydroxide (ZH) was challenged with common environmental contaminants (CO2, SO2, and NO2) to determine the impact on chemical warfare agent decomposition. Several environmental adsorbates rapidly formed on the ZH surface through available hydroxyl species and coordinatively unsaturated zirconium sites. ZH decontamination effectiveness was determined using a suite of instrumentation including in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) to monitor sarin (GB) decomposition in real time and at ambient pressure. Surface products were characterized by ex situ X-ray photoelectron spectroscopy (XPS). The adsorption enthalpies, entropies, and bond lengths for environmental contaminants and GB decomposition products were estimated using density functional theory (DFT). Consistent with the XPS and DRIFTS results, DFT simulations predicted the relative stabilities of molecular adsorbates and reaction products in the following order: CO2 < NO2 < GB ≈ SO2. Microbreakthrough capacity measurements on ZH showed a 7-fold increase in the sorption of NO2 vs SO2, which indicates differences in the surface reactivity of these species. GB decomposition was rapid on clean and CO2-dosed ZH and showed reduced decomposition on SO2- and NO2-predosed samples. Despite these findings, the total GB sorption capacity of clean and predosed ZH was consistent across all samples. These data provide insight into the real-world use of ZH as a reactive sorbent for chemical decontamination applications.

Photoenhanced Degradation of Sarin at Cu/TiO2 Composite Aerogels: Roles of Bandgap Excitation and Surface Plasmon Excitation.

Multifunctional composites that couple high-capacity adsorbents with catalytic nanoparticles (NPs) offer a promising route toward the degradation of organophosphorus pollutants or chemical warfare agents (CWAs). We couple mesoporous TiO2 aerogels with plasmonic Cu nanoparticles (Cu/TiO2) and characterize the degradation of the organophosphorus CWA sarin under both dark and illuminated conditions. Cu/TiO2 aerogels combine high dark degradation rates, which are facilitated by hydrolytically active sites at the Cu||TiO2 interface, with photoenhanced degradation courtesy of semiconducting TiO2 and the surface plasmon resonance (SPR) of the Cu nanoparticles. The TiO2 aerogel provides a high surface area for sarin binding (155 m2 g-1), while the addition of Cu NPs increases the abundance of hydrolytically active OH sites. Degradation is accelerated on TiO2 and Cu/TiO2 aerogels with O2. Under broadband illumination, which excites the TiO2 bandgap and the Cu SPR, sarin degradation accelerates, and the products are more fully mineralized compared to those of the dark reaction. With O2 and broadband illumination, oxidation products are observed on the Cu/TiO2 aerogels as the hydrolysis products subsequently oxidize. In contrast, the photodegradation of sarin on TiO2 is limited by its slow initial hydrolysis, which limits the subsequent photooxidation. Accelerated hydrolysis occurs on Cu/TiO2 aerogels under visible illumination (>480 nm) that excites the Cu SPR but not the TiO2 bandgap, confirming that the Cu SPR excitation contributes to the broadband-driven activity. The high hydrolytic activity of the Cu/TiO2 aerogels combined with the photoactivity upon TiO2 bandgap excitation and Cu SPR excitation is a potent combination of hydrolysis and oxidation that enables the substantial chemical degradation of organophorphorus compounds.

Degradation of Fatal Toxic Nerve Agents on Dry TiO2.

Despite a recent dramatically increased risk of using chemical warfare agents in chemical attacks and assassinations, fundamental interactions of toxic chemicals with other materials are poorly understood, and micromechanisms of their chemical degradation are yet to be established. This represents an outstanding challenge in both fundamental science and practical applications in combat against chemical weapons. One of the most versatile and multifunctional oxides, TiO2, has been suggested as a promising material to quickly adsorb and effectively destroy toxins. In this paper, we explore how sarin (also known as GB) adsorbs and decomposes on dry nanoparticles of TiO2 anatase and rutile phases. We found that both anatase and rutile readily adsorb sarin gas molecules because of a strong electrostatic attraction between the phosphoryl oxygen and surface titanium atoms. The sarin decomposition most likely proceeds via a propene elimination; however, the reaction is exothermic on the rutile (110) surface and endothermic on the anatase (101) surface. High energy barriers suggest that sarin would hardly decompose on pristine dry surfaces of TiO2, and degradation reactions can be triggered by defects or contaminants under realistic operational conditions.

Spectroscopically Resolved Binding Sites for the Adsorption of Sarin Gas in a Metal-Organic Framework: Insights beyond Lewis Acidity.

Here we report molecular level details regarding the adsorption of sarin (GB) gas in a prototypical zirconium-based metal-organic framework (MOF, UiO-66). By combining predictive modeling and experimental spectroscopic techniques, we unambiguously identify several unique bindings sites within the MOF, using the P═O stretch frequency of GB as a probe. Remarkable agreement between predicted and experimental IR spectrum is demonstrated. As previously hypothesized, the undercoordinated Lewis acid metal site is the most favorable binding site. Yet multiple sites participate in the adsorption process; specifically, the Zr-chelated hydroxyl groups form hydrogen bonds with the GB molecule, and GB weakly interacts with fully coordinated metals. Importantly, this work highlights that subtle orientational effects of bound GB are observable via shifts in characteristic vibrational modes; this finding has large implications for degradation rates and opens a new route for future materials design.

Environmental Effects on Zirconium Hydroxide Nanoparticles and Chemical Warfare Agent Decomposition: Implications of Atmospheric Water and Carbon Dioxide.

Zirconium hydroxide (Zr(OH)4) has excellent sorption properties and wide-ranging reactivity toward numerous types of chemical warfare agents (CWAs) and toxic industrial chemicals. Under pristine laboratory conditions, the effectiveness of Zr(OH)4 has been attributed to a combination of diverse surface hydroxyl species and defects; however, atmospheric components (e.g., CO2, H2O, etc.) and trace contaminants can form adsorbates with potentially detrimental impact to the chemical reactivity of Zr(OH)4. Here, we report the hydrolysis of a CWA simulant, dimethyl methylphosphonate (DMMP) on Zr(OH)4 determined by gas chromatography-mass spectrometry and in situ attenuated total reflectance Fourier transform infrared spectroscopy under ambient conditions. DMMP dosing on Zr(OH)4 formed methyl methylphosphonate and methoxy degradation products on free bridging and terminal hydroxyl sites of Zr(OH)4 under all evaluated environmental conditions. CO2 dosing on Zr(OH)4 formed adsorbed (bi)carbonates and interfacial carbonate complexes with relative stability dependent on CO2 and H2O partial pressures. High concentrations of CO2 reduced DMMP decomposition kinetics by occupying Zr(OH)4 active sites with carbonaceous adsorbates. Elevated humidity promoted hydrolysis of adsorbed DMMP on Zr(OH)4 to produce methanol and regenerated free hydroxyl species. Hydrolysis of DMMP by Zr(OH)4 occurred under all conditions evaluated, demonstrating promise for chemical decontamination under diverse, real-world conditions.

Optimizing Toxic Chemical Removal through Defect-Induced UiO-66-NH2 Metal-Organic Framework.

For the first time, an increasing number of defects were introduced to the metal-organic framework UiO-66-NH2 in an attempt to understand the structure-activity trade-offs associated with toxic chemical removal. It was found that an optimum exists with moderate defects for toxic chemicals that react with the linker, whereas those that require hydrolysis at the secondary building unit performed better when more defects were introduced. The insights obtained through this work highlight the ability to dial-in appropriate material formulations, even within the same parent metal-organic framework, allowing for trade-offs between reaction efficiency and mass transfer.

Oxidation-stable plasmonic copper nanoparticles in photocatalytic TiO2 nanoarchitectures.

Ultraporous copper/titanium dioxide (Cu/TiO2) aerogels supporting <5 nm diameter copper nanoparticles are active for surface plasmon resonance (SPR)-driven photocatalysis. The extended nanoscale Cu‖TiO2 junctions in Cu/TiO2 composite aerogels-which arise as a result of photodepositing copper at the surface of the nanoparticulate-bonded TiO2 aerogel architecture-stabilize Cu against oxidation to an extent that preserves the plasmonic behavior of the nanoparticles, even after exposure to oxidizing conditions. The metallicity of the Cu nanoparticles within the TiO2 aerogel is verified by aberration-corrected scanning transmission electron microscopy, electron energy-loss spectroscopy, and infrared spectroscopy using CO binding as a probe to distinguish Cu(0) from Cu(i). In contrast, photoreduction of Cu(ii) at a commercial nanoscale anatase TiO2 powder with primary particle sizes significantly larger than those in the aerogel results in a copper oxide/TiO2 composite that exhibits none of the plasmonic character of Cu nanoparticles. We attribute the persistence of plasmonic Cu nanoparticles without the use of ligand stabilizers to the arrangement of Cu and TiO2 within the aerogel architecture where each Cu nanoparticle is in contact with multiple nanoparticles of the reducing oxide. The wavelength dependence of the photoaction spectra for Cu/TiO2 aerogel films reveals visible-light photocatalytic oxidation activity initiated by an SPR-driven process-as opposed to photo-oxidation initiated by excitation of narrow-bandgap copper oxides.

MOFabric: Electrospun Nanofiber Mats from PVDF/UiO-66-NH2 for Chemical Protection and Decontamination.

Textiles capable of capture and detoxification of toxic chemicals, such as chemical-warfare agents (CWAs), are of high interest. Some metal-organic frameworks (MOFs) exhibit superior reactivity toward CWAs. However, it remains a challenge to integrate powder MOFs into engineered materials like textiles, while retaining functionalities like crystallinity, adsorptivity, and reactivity. Here, we present a simple method of electrospinning UiO-66-NH2, a zirconium MOF, with polyvinylidene fluoride (PVDF). The electrospun composite, which we refer to as "MOFabric", exhibits comparable crystal patterns, surface area, chlorine uptake, and simulant hydrolysis to powder UiO-66-NH2. The MOFabric is also capable of breaking down GD (O-pinacolyl methylphosphonofluoridae) faster than powder UiO-66-NH2. Half-life of GD monitored by solid-state NMR for MOFabric is 131 min versus 315 min on powder UiO-66-NH2.

Postsynthetic Incorporation of a Singlet Oxygen Photosensitizer in a Metal-Organic Framework for Fast and Selective Oxidative Detoxification of Sulfur Mustard.

A fullerene-based photosensitizer is incorporated postsynthetically into a Zr6 -based MOF, NU-1000, for enhanced singlet oxygen production. The structural organic linkers in the MOF platform also act as photosensitizers which contribute to the overall generation of singlet oxygen from the material under UV irradiation. The singlet oxygen generated by the MOF/fullerene material is shown to oxidize sulfur mustard selectively to the less toxic bis(2-chloroethyl)sulfoxide with a half-life of only 11 min.

Formation, Migration, and Reactivity of Au-CO Complexes on Gold Surfaces.

We report experimental as well as theoretical evidence that suggests Au-CO complex formation upon the exposure of CO to active sites (step edges and threading dislocations) on a Au(111) surface. Room-temperature scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy, transmission infrared spectroscopy, and density functional theory calculations point to Au-CO complex formation and migration. Room-temperature STM of the Au(111) surface at CO pressures in the range from 10(-8) to 10(-4) Torr (dosage up to 10(6) langmuir) indicates Au atom extraction from dislocation sites of the herringbone reconstruction, mobile Au-CO complex formation and diffusion, and Au adatom cluster formation on both elbows and step edges on the Au surface. The formation and mobility of the Au-CO complex result from the reduced Au-Au bonding at elbows and step edges leading to stronger Au-CO bonding and to the formation of a more positively charged CO (CO(δ+)) on Au. Our studies indicate that the mobile Au-CO complex is involved in the Au nanoparticle formation and reactivity, and that the positive charge on CO increases due to the stronger adsorption of CO at Au sites with lower coordination numbers.

Electric field changes on Au nanoparticles on semiconductor supports--the molecular voltmeter and other methods to observe adsorbate-induced charge-transfer effects in Au/TiO2 nanocatalysts.

Infrared (IR) studies of Au/TiO2 catalyst particles indicate that charge transfer from van der Waals-bound donor or acceptor molecules on TiO2 to or from Au occurs via transport of charge carriers in the semiconductor TiO2 support. The ΔνCO on Au is shown to be proportional to the polarizability of the TiO2 support fully covered with donor or acceptor molecules, producing a proportional frequency shift in νCO. Charge transfer through TiO2 is associated with the population of electron trap sites in the bandgap of TiO2 and can be independently followed by changes in photoluminescence intensity and by shifts in the broad IR absorbance region for electron trap sites, which is also proportional to the polarizability of donors by IR excitation. Density functional theory calculations show that electron transfer from the donor molecules to TiO2 and to supported Au particles produces a negative charge on the Au, whereas the transfer from the Au particles to the TiO2 support into acceptor molecules results in a positive charge on the Au. These changes along with the magnitudes of the shifts are consistent with the Stark effect. A number of experiments show that the ∼3 nm Au particles act as "molecular voltmeters" in influencing ΔνCO. Insulator particles, such as SiO2, do not display electron-transfer effects to Au particles on their surface. These studies are preliminary to doping studies of semiconductor-oxide particles by metal ions which modify Lewis acid/base oxide properties and possibly strongly modify the electron-transfer and catalytic activity of supported metal catalyst particles.

Selective catalytic oxidative-dehydrogenation of carboxylic acids-acrylate and crotonate formation at the Au/TiO2 interface.

The oxidative-dehydrogenation of carboxylic acids to selectively produce unsaturated acids at the second and third carbons regardless of alkyl chain length was found to occur on a Au/TiO2 catalyst. Using transmission infrared spectroscopy (IR) and density functional theory (DFT), unsaturated acrylate (H2C═CHCOO) and crotonate (CH3CH═CHCOO) were observed to form from propionic acid (H3CCH2COOH) and butyric acid (H3CCH2CH2COOH), respectively, on a catalyst with ∼3 nm diameter Au particles on TiO2 at 400 K. Desorption experiments also show gas phase acrylic acid is produced. Isotopically labeled (13)C and (12)C propionic acid experiments along with DFT calculated frequency shifts confirm the formation of acrylate and crotonate. Experiments on pure TiO2 confirmed that the unsaturated acids were not produced on the TiO2 support alone, providing evidence that the sites for catalytic activity are at the dual Au-Ti(4+) sites at the nanometer Au particles' perimeter. The DFT calculated energy barriers between 0.3 and 0.5 eV for the reaction pathway are consistent with the reaction occurring at 400 K on Au/TiO2.

Inhibition at perimeter sites of Au/TiO2 oxidation catalyst by reactant oxygen.

TiO(2)-supported gold nanoparticles exhibit surprising catalytic activity for oxidation reactions compared to noble bulk gold which is inactive. The catalytic activity is localized at the perimeter of the Au nanoparticles where Au atoms are atomically adjacent to the TiO(2) support. At these dual-catalytic sites an oxygen molecule is efficiently activated through chemical bonding to both Au and Ti(4+) sites. A significant inhibition by a factor of 22 in the CO oxidation reaction rate is observed at 120 K when the Au is preoxidized, caused by the oxygen-induced positive charge produced on the perimeter Au atoms. Theoretical calculations indicate that induced positive charge occurs in the Au atoms which are adjacent to chemisorbed oxygen atoms, almost doubling the activation energy for CO oxidation at the dual-catalytic sites in agreement with experiments. This is an example of self-inhibition in catalysis by a reactant species.

Reaction Probability and Infrared Detection of the Primary Ozonide in Collisions of O3 with Surface-Bound C60.

The kinetics and mechanism of reactions between gas-phase ozone and surface-bound C60 have been investigated by monitoring changes to reflection-absorption infrared spectra within a well-characterized film of C60 during exposure to a controlled flux of pure ozone. These ultrahigh vacuum studies provide direct infrared spectroscopic evidence for the formation and decomposition of a primary ozonide of C60. The spectral assignments of this highly unstable intermediate have been verified using electronic structure calculations. Theory and experiment revealed that C60 oxidized nearly exclusively via addition of ozone across the double bond that links two six-carbon-containing rings of the molecule. Following spectral characterization, the initial probability for ozone to react with the surface was found to be 5.8 ± 0.2 × 10(-4). Once formed, the ozonide quickly thermally decomposed to a variety of carbonyl-containing products.